1. remove screw from bottom front of lower hull. |
2. Remove two screws from bottom rear of lower hull. |
3. Remove two silver screws from above the roadwheels. |
4. One screw is towards the front just behind the sprocket. |
5. The other is near the middle. |
6. Remove the clamps holding the air hoses on engine deck in place. |
7. Alternatively remove just hoses from air filter pipes. |
8. Note main connector (top middle in white) and aerial connector (bottom right in silver). |
9. Disconnect main connector (white) as shown above. |
10. Disconnect aerial connector as shown above. |
11. Lower hull separated from upper hull ready to be worked upon. |
12. Upper hull separated from lower hull. Note turret ring and rotation gear. |
