ElMod - ThinkTank Blaster IV Sound Module

Please note:
This sound module requires one of the following:
A ThinkTank Control Unit (ThinkTank TankModule ECO or ThinkTank TankModule PRO)

ThinkTank Blaster is a fullly configurable, polyphone sound module for radio controlled tanks. 

Details

• Five channels for the simultaneous output of sounds.
• Open file format: wav, 8 bit, 22kHz sampling rate, mono, PCM.
• Up to four additional clips which can be defined by the user.
• Speed dependent engine sound.
• Random selection of several chain squeaks, depending on speed.
• Up to seven samples for the turret rotation depending on the turret speed.
• Alternative sounds for turret rotation when motor is switched off (operation by hand / emergency operation)
• Distinction between cold and warm start.
• Random selection of up to ten clips for switching engine on / off.
• Sound for canon movement.
• Synchronized shot sound.
• MG sound: continuous shots, the last one may differ (for example it may contain an echo or reloading sound).
• Direct connection to an 8 Ohm speaker.
• Simple installation: just plug in the module on the ThinkTank Tank Module.
• State-of-the-Art technology by powerfull 32-bit CPU and high efficient Class-D amplifier
• Output power (RMS): 7Watts (@ 7.2V), 12Watts (@ 9,6V)
• Dimensions: 44mm x 30mm (1.8" x 1.2")

This module offers multiple unique features. The system outstands with its openness. All sound data are saved unencrypted as wav-files on a standard microSD-card. Therefore every PC owner can change and extend them. The SD-card is delivered with a set of around 25 different sample sets for different vehicle types and our sample library is constantly growing.
The currently active sample set is determined by the user by starting a small setup programme for Windows(tm) PCs.

Numerous events which can occur in a tank are represented and up to five sounds can be played at the same time (polyphony).
It is possible to define and play several user-defined sounds like battle sounds, battle cries or songs.
Any 8 Ohm speaker may be connected directly to the board. No external amplifiers are necessary. We recommend for example the Visaton FRS7-8 (great dynamic range and small dimensions) or the Visaton FRS8-8 (better bass sound but quieter and larger). The chassis should be in a as large as possible, closed and air tight box which is coated with accoustic insulating material.

Includes: 1GB Micro SD Card + Micro SD Card to SD Card Adapter.

Current Sounds Pre-Installed on Card include:

Abrams M1
Chaperon
Ford 1931
Gepard
Jagdpanther
Kugelblitz
Ein Kutter
Leopard 1
M16 Halftrack
M41 - v1.41 by Annanas
M41 - by ElMod
M4 Diesel
M4 Gasoline
Moebelwagen
Panther
Panzer III
Panzer IV
Tiger I
King Tiger
Pershing
T-34
SdKfz 222
SdKfz 223
SturmTiger

OzArmour is the Official El-Mod Distributor for Australia